CN 200N1
CN 200N1
Audio transformer assembly for LF conducted immunity testing
Highlights
One-box transformer and 0.5ohm load assembly
Frequency response 10Hz to 250kHz
Secondary saturation 50A per transformer
Audio power 2 x 200W
Freely configurable on primary/secondary; serial, parallel, single
Turns ratio 2:1 step down
Built-in non-inductive load resistor 0.5ohm, 250W
Application
CN 200N1 - Single-box transformer assembly for LF conducted immunity testing
The CN 200N1 is a standalone coupling network unifying two audio transformers being individually configurable for various test requirements (e.g. Ford EMC-CS-2009.1, German Lloyd GL VI-7-2 and SAE J1113-2). The CN 200N1 is used to apply the test signals to the lines under test via an audio transformer to perform ripple voltage tests and continuous or transient conducted immunity tests.
标准
AIRBUS
Chrysler CS-11809 (2009)
DaimlerChrysler DC-10615
DO 160 Section 16
DO 160 Section 18
Ford EMC-CS-2009.1
GLloyd VI-7-2
ISO 11452-10
EMC-CS-2010JLR V1.1 (2011-01)
MIL STD 461 D CS 101
MIL STD 461 D CS 109
MIL STD 461 E CS 101
MIL STD 461 E CS 109
MIL STD 461 F CS 101
MIL STD 461 F CS 109
MIL-STD-704
Mitsubishi ES-X82115
SAE J1113-2
Tata TST/TS/WI/257
Benefits
CN 200N1 - Fully contained coupling device as per Ford EMC-CS-2009.1
The CN 200N1 is an easy-to-use coupling device consisting of two audio transformers and a 0.5ohm/250watt load resistor configurable as required by Ford EMC-CS-2009.1, Fig. 18-6 for AC ground voltage offset testing. The two transformers need to be connected in series on their primary side, their secondary side is paralleled and loaded by the 0.5ohm non-inductive resistor load.
服务热线:
版权所有:北京神州技测科技有限公司 京ICP备13036816号-1 网站建设:中企动力 北京